http://pesn.com/Radio/Free_Energy_Now/recordings/2008/080602_RichardHicks_and_DanAtkinson_H2Oil_eeFuel.mp3 - Audio interview.
Hello all,
I wanted to take this opportunity to notify everyone in the group about an exciting new fuel additive that I discovered from a podcast by Sterling Allan. DISCLAIMER, I am set up as a distributor for the product described, and may ultimately have a financial interest in it. At this point, I have not personally tested the product in my car, although I intend to. I am getting involved now because I believe it could be a great opportunity, and at this point, it’s free to get involved.
The product is supposed to save 10% or more on fuel mileage for about 60% of the people who use it. Some few people get very little improvement and some get quite a bit. The reason for the variance is that engines and cars vary widely, and driver habits vary widely. I thought you might want to consider signing up for free as a distributor. However, I think, after they have their grand opening around June 20, it may not be free any more. I signed up just to make sure I didn’t miss it. There is no obligation to participate and you don’t have to reveal any financial data at first. They do ask for your SSN but you can sign up without it. Just enter the data requested and indicated by the asterisks. If you become active as a distributor, I’m sure more data would be required, since they have to be able to pay you, and they have to be able to report to the IRS.
In terms of the additive itself, it uses nanometer scale water droplets in an emulsion in the additive. According to the audio I heard, the water droplets explode in the combustion chamber and enhance the combustion process. There’s not so much as to reduce the flame. Also, the hydrogen may disassociate from the oxygen and help the combustion. They say it also reduces emissions. They say they’ve been selling in other countries for many years, and have a billion miles of testing logged (for customers, etc.). If you decide to sign up, please use the link below with my name in it:
http://www.fuellegacy.com/rfrazier
I don’t know yet how fully I’ll be participating in this. However, I’ll almost certainly be using the product myself, after further confirmation of it’s validity. I should be clear that I have only heard an audio program on the topic at this point. The interview was conducted by someone I trust, and the interviewees from the company were impressive. I’ve included some more links below, including the audio file. However, again, if you sign up, please do so from the rfrazier link above. Let me know what you think.
Sincerely,
Ron Frazier
Moderator - futureenergynow, futureenergyproducts
http://peswiki.com/index.php/Directory:H2Oil%27s_Nanotech_Fuel_–_eeFuel_and_eeLube_%284ourfuture - Pure Energy Systems page about this product.
http://pesn.com/Radio/Free_Energy_Now/recordings/2008/080602_RichardHicks_and_DanAtkinson_H2Oil_eeFuel.mp3 - Audio interview.
http://groups.yahoo.com/group/futureenergynow/ — http://groups.yahoo.com/group/futureenergyproducts/
Recordable DVD’s & CD’s can fail in 2-5 years. Don’t let that happen to YOUR data.
Tags: Audio · Fossil Fuel Power · Hydrogen Power · Podcast
Hello all,
Well, I’ve been away from the blog for quite a while, and I appologize for that. I’ve had about a million things keeping me busy. And, I’ve also had some technical problems with the WordPress software. I hope to be publishing more regularly.
I thought you might find this of interest. It comes from the US Govt
Energy Efficiency and Renewable Energy Division.
http://www.eere.energy.gov/news/news_detail.cfm/news_id=11500
You can get their RSS news feed at: http://www.eere.energy.gov/news/rss/enn.xml
Here’s a 2002 article about lighting I found after a Google search:
http://www.eere.energy.gov/buildings/info/documents/pdfs/lmc_vol1_final.pdf
Here’s a quote from the 1st article:
“The Energy Independence and Security Act of 2007, signed into law on
December 19th, phases out the use of inefficient incandescent lights and
imposes improved energy efficiency standards on a wide variety of products.
According to the American Council for an Energy-Efficient Economy (ACEEE),
the new standards for light bulbs require them to use about 20%-30% less
energy by 2014, while requiring DOE to set standards for light bulbs to cut
their energy use at least 35% by 2020. The ACEEE notes that the initial
targets could be met with compact fluorescent lamps and advanced
incandescent lamps that combine halogen capsules with infrared-reflective
coatings, while the 2020 standards will encourage the use of LEDs
(light-emitting diodes) and other advanced lighting technologies.”
Now, I don’t have a problem with this concept, I think it’s a great
idea. However, I do have a problem with the implications based on the
current state of technology. Based on the 2nd article I quoted above,
lighting accounts for about 8% of our total electricity usage. Now, my
house is a late 80’s vintage, inexpensive, all electric, and very
inefficient model. Now, that’s not the way I want it, but it’s what I’ve
got. I spend about $240 / month on electricity, which is $2880 / year. If
my lighting is 8% of that, then it costs me $230 / year to light the
home. Now, if I were to save 60% of that, I would save $138 / year.
So, let’s see if it’s worth it to do the retrofits. The most viable option
is compact fluorescent. Now, I’ll admit that I got all excited about 2
years ago about these things, and have even considered selling them. I’m
not so excited any more, for reasons I’ll discuss. They cost about $1.65 /
bulb (compared to Edison bulbs at $0.40 / bulb.) Now, the lighting report
says the average home has about 39 bulbs. I think mine has about 25
bulbs. I’ve already replaced some of my fixtures with circular fluorescent
ones. So, it will cost me about $44 (including tax) to replace all the
Edison bulbs which are left. This is much better than the $5-6 / bulb
these were only recently. So, from a simple economics point of view, I
could save about $94 / year by replacing the bulbs. That doesn’t get me
too excited, but it’s still a reasonable deal. Now, for the problems.
A) First, I simply don’t believe the lifetime claims they put on these
bulbs. They say 10 times a standard bulb. Based on my experience with a
number of these bulbs, I say rubbish. I figure they may last 2-3 times
what an incandescent bulb does (for 4 times the cost), but not 10
times. So, I would anticipate replacing these CFL’s every year. Not only
that, they may all start failing at once, requiring a lump sum investment.
B) They don’t like control circuits, like photocells and motion activated
fixtures. This type of use burns these bulbs out rapidly.
C) They don’t like dimmers. There have been some “dimmable” fluorescent
bulbs on the market. They were much more expensive and much less
reliable. Also, their dimming range usually cuts off at 20-30% of maximum
brightness. Most manufacturers are no longer making them due to
problems. So, in my living room, my dining room, and my bathroom, I cannot
use CFL’s or I have to give up the ability to dim the lights.
D) Finally, what may be the biggest problem of all. That is
disposal. CFL bulbs are a complex combination of plastic, glass, metals,
chemicals, and electronic components. None of these things are
biodegradable (neither are Edison bulbs), and some are hazardous. The most
problematic is mercury. As far as I know, all fluorescent bulbs have
mercury, and CFL’s are no exception. Did you know that there are about 14
steps to clean up the mess of a CFL if you break one? Do you know what the
steps are? Me neither. Not only that, if we have 100 million homes
replacing 30 light bulbs per year, then we’ll have 3 BILLION light bulbs,
containing mercury, going into the waste stream every year. Do you REALLY
think those are going to be recycled? I don’t think that converting the
country to CFL’s is a good idea.
There you have it. The lowdown on the not quite so attractive compact
fluorescent light bulb. Now, what about the other alternatives? Well,
there are enhanced halogen bulbs, which I haven’t studied to any great
degree. However, when was the last time you replaced the “bulb module” in
your car’s headlights? They usually run $10 - $20 / bulb. In most
applications I’ve dealt with, halogen bulbs seem to last for LESS time than
Edison bulbs. Doesn’t sound like a great alternative.
Finally, there are LED’s. These hold great promise, and I’m quite
fascinated by them. But, I’m not buying them just yet. I think CCrane
company sells a 60 W equivalent bulb for $100. Ouch! Of course, the
prices will come down.
For the moment, I may just continue buying Edison bulbs. Does anybody know
of a solution that actually works and is practical?
Sincerely,
Ron Frazier
The permalink for this article is: http://www.c3energy.com/blog/wordpress/2008/05/01/say-good-bye-to-your-edison-incandescent-bulbs/
You can follow comments for this article with the RSS feed.
Tags: Environment - Pollution · Lighting - Fluorescent · Lighting - General · Lighting - Incandescent · Lighting - LED
My readers may think I fell off the planet, since I haven’t posted anything for a several days. Well, I’m still here. I’ve been incredibly busy just dealing with daily life issues. Also, I’ve been working hard to add some more features to the blog system as well as upgrading the blog software and plugins. Well, that didn’t go well. For days, I’ve been unable to add new categories to the blog, and the permalinks stopped working. I’ve been searching forums and websites trying to determine why. I know other people have been having similar problems. Today, it seems to be working again and I don’t know why that’s happening either. I guess I will take good luck where I can get it. Maybe the hosting company was messing with their servers. I also have been tinkering with the htaccess files to redirect all querys to www.c3energy.com over to c3energy.com. It seemed like a good idea at the time. Then, I couldn’t publish with FrontPage. Then I read some more and found that FrontPage was incompatible with WordPress. Arghhh! I read some more and I think I found some more modifications to the htaccess files that are supposed to fix this problem. Now, I am an engineer by training, and I’m fully capable of editing Linux configuration files when necessary. But frankly, I don’t wish to spend my time being a blog engineer. I don’t want to learn all the intricacies of htaccess files. I don’t want to become an expert in all the ways hackers can break blogs, although I may have to. I want to spend my time researching and documenting alternate energy. Anyway, I think the blog is running again. I hope to be publishing energy related topics again soon.
Sincerely,
Ron
The permalink for this article is:
http://c3energy.com/blog/wordpress/2007/10/22/im-still-here-getting-some-frustration-off-my-chest-linux/
You can follow comments to this article through the RSS feed.
Tags: About The Blog - Tech Issues
October 4th, 2007 · Comments Off
This information is for those reading the blog on the website. I’ve posted Podcast #1, and it’s backdated to 10-01-07. You’ll have to scroll down a bit to see it.
Ron
Tags: Podcast
(image credit)
(About The Blog)
Hello all. I’ve been working to enhance the RSS Feeds of the blog. I have now added a link to the end of each post that is accepting comments so you can follow comments to that post by RSS feed. I plan to be doing this as a regular occurance. If I forget, you can take the permalink for any article and add “feed/” to the end (without the quotes) and you can get the feed for comments for that article. I’ve also added a feed icon on the left sidebar which will retrieve only items with the Podcast category marked. Normally, this will only contain entries with an audio file attached. I do have a couple of test entries without audio files. I’m working on adding a page with RSS feeds for all categories. I had to check every category for this post in order to force those to appear in the sidebar so I can get the permalinks for them. I hope that doesn’t cause too much confusion.
Sincerely,
Ron
The Permalink for this article is:
http://c3energy.com/blog/wordpress/2007/10/03/new-enhancements-to-the-blogs-rss-feeds/
Track comments for this article through the RSS Feed.
Tags: About The Blog - Tech Issues · Audio · Batteries - Flywheels · Bio-Fuel Power · Blogs - Websites · Books - Book Reviews · Cosmic Energy · Electric Vehicles · Environment - Pollution · Fossil Fuel Power · General Energy · Geothermal Energy · Gravity Power · Groups - Organizations - Associations · Hydrogen Power · Lighting - Fluorescent · Lighting - General · Lighting - Glow In Dark · Lighting - HID · Lighting - Incandescent · Lighting - LED · Lighting - Solar · Magnetics - Electromagnetics · Nuclear Power - LENR · Photo · Podcast · Products - Product Reviews · Publications - Media · Reader Feedback - Q and A · Scientific Philosophy · Solar Cooling · Solar Electric · Solar Heat · Sustainable Buildings · Video · Water Power · Wind Power
(image credit)
(Podcast)
(image credit)
(Biofuel)
(image credit)
(Fossil Fuel)
Podcast Download: C3AEU001-2007-10-01.mp3
Hello all. As the headline says, Podcast #1 is in the can (as they say)! I have worked long and hard to get this, my first, podcast recorded, edited, encoded, published, and an RSS feed established. It’s been quite an experience, and a good bit of work, but I’m proud of the final product. Hopefully, the future ones will go smoother. This is a short introductory episode which describes the purpose of the podcast and of C3 Energy.
I also tackle a real issue in this podcast. I am in communication with an associate who has a factory that uses a huge amount of natural gas at an outrageous cost. I am seeking your help and knowledge in finding a cheaper alternative fuel for him, if one exists. The details are in the podcast. Please let me know if you have any ideas as to how to solve this problem.
Here are the links discussed in the podcast:
Although not specifically mentioned in the podcast, I also found these resources in my research:
I hope you enjoy the podcast and find the information interesting and helpful. If you would like to comment or have any ideas for my associate, please leave a comment on my blog.
Sincerely,
Ron
If you wish to subscribe for free to the blog or podcast, please see the RSS links at the bottom or the RSS widgets on the side of the blog page. You may also register for free to leave comments.
Copyright (c) 2007 by Ron Frazier
You may cite or quote me for non-commercial purposes as long you do not change the content and as long as you provide a link back to the source: http://c3energy.com/blog/wordpress/ .
The Permalink for this article is:
http://c3energy.com/blog/wordpress/2007/10/01/c3aeu001-2007-10-01-podcast-1-is-in-the-can-need-help-with-natural-gas-costs/
Track comments for this article through the RSS feed.
Tags: Bio-Fuel Power · Fossil Fuel Power · Podcast
(image credit)
(Podcast)
Hello all. I have been working hard to get my first podcast done. I’m looking for a server for it to live on now. I’m not sure I want it on the web server in case of bandwidth issues as the podcast becomes more popular. I expect to be releasing it shortly. This is just a test entry so I can test the new podcast category and the news feed. Real content coming soon.
By the way, my glasses are now fixed. LensCrafters did it for free, which was nice. I’ve had good experiences with them before. For those of you who don’t wear glasses, you have no idea how disorienting it is to have one eye with clear vision and one with extremely fuzzy vision. It’s essentially impossible to use the computer and very difficult to even walk without a patch on one eye. I’m very thankful to have two functional eyes again!
Ron
The Permalink for this article is:
http://c3energy.com/blog/wordpress/2007/10/01/i-can-see-podcast-episode-coming-shortly/
Track comments for this article through the RSS feed.
Tags: Podcast
September 28th, 2007 · No Comments
Hello all,
I was going to write a blog post … BUT … then it happened. I tried to clean some dust off my glasses as I have hundreds of times before. Then, BOOM, one of the lenses popped out. Now, looking at the computer screen with one clear eye is making me dizzy. I’m not making this up. I wish I were. So, my writing will be on hold for a few days until I get this fixed. I apologize, but that’s the way it is. I hope to be back in action next week. As far as the previous part of this week, I’ve just been really busy. More later.
Sincerely,
Ron
The Permalink for this article is:
http://c3energy.com/blog/wordpress/2007/09/28/i-was-going-to-write-a-blog-post-but/
Track comments for this article through the RSS feed.
Tags: About The Blog - Tech Issues
September 24th, 2007 · 1 Comment
( image credit )
(Fossil Fuel)
Here is an item I got off the Energy Efficiency and Renewable Energy website. I thought I’d pass it along.
September 19, 2007
Report Documents Massive Flaring of Natural Gas Worldwide
A quantity of natural gas greater than one-quarter of the natural gas consumed in the United States is being sent up in flames each year, according to a recent report. The World Bank announced in late August that it had commissioned the National Oceanic and Atmospheric Administration (NOAA) to perform a global survey of natural gas flaring using satellite observations. The survey spanned a 12-year period, from 1995 through 2006, and found that natural gas flaring ranged from 150 to 170 billion cubic meters each year. In 2006, roughly 170 billion cubic meters, or nearly 5 trillion cubic feet, was flared, an amount equal to 5.5% of global production or 27% of the annual U.S. consumption of natural gas.
Natural gas is often released during oil production and processing, and it is flared to dispose of it. Oil producers flare the gas rather than sell it because of the lack of natural gas infrastructure or markets in the areas where oil is produced. The gas is flared for safety reasons, plus the greenhouse gas impact of the natural gas is lowered by burning it. The World Bank’s Global Gas Flaring Reduction (GGFR) partnership aims to encourage a reduction in flaring by means such as re-injecting the natural gas into the oil reservoir, using it onsite for power generation, piping it to nearby markets, or liquefying it for shipment to distant markets. According to the World Bank, the natural gas flared each year generates roughly 400 million tons of carbon dioxide and would be worth about $40 billion in the United States. See the World Bank press release, the GGFR Web page, and the full NOAA report (PDF 9 MB). Download Adobe Reader.
Sincerely,
Ron
The Permalink for this article is:
http://c3energy.com/blog/wordpress/2007/09/24/wasted-5-trillion-cubic-feet-of-natural-gas-each-year/
Track comments for this article through the RSS feed.
Tags: Fossil Fuel Power
September 20th, 2007 · 1 Comment
Hello all. I was doing research into putting audio and video on the site. I found http://www.brightcove.tv/ which allows streaming of very high quality video with a nice Flash interface. I found this wind power video from Farmers’ Almanac TV and I couldn’t resist posting it to see how it works within the blog. Not only that, it’s relevant to one of our topics. Let me know how this works for you. It may be a while before I produce my own media, but it’s always nice to have the tools waiting in the toolbox.
Sincerely,
Ron
The Permalink for this article is:
http://c3energy.com/blog/wordpress/2007/09/20/wind-power-video-from-farmers-almanac-tv/
Track comments for this article through the RSS feed.
Tags: Video · Wind Power